TRENDnet N300 300Mbps 13 dBi Outdoor PoE Access Point 5GHz (White) V1.0R
|
TRENDnet's 13 dBi Outdoor PoE Access Point, model TEW-734APO, provides wireless N300 (5 GHz) building to building connectivity. It supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes. Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes. The rugged IP55 rated TEW-734APO comes with a proprietary PoE injector and a pole mounting kit. An integrated 13 dBi directional antenna, 5 GHz WiFi N300, and an included PoE injector facilitate building to building networking. Fat AP mode supports a variety of installation scenarios with Access Point (AP), WDS Bridge, WDS Repeater, Client, and CPE + AP modes. Built for protected outdoor locations with an IP55 weather rating and an operating temperature range of -20 - 70 °C (-4 - 158 °F). Warranty: Three years. Barcode: 710931160697 Product Type: Access Point Product Family: N300
|
-
Wireless N300 building to building networking (5 GHz)
-
Fat AP, Thin AP, Virtual AC, and Virtual AC + Thin AP modes
-
Fat AP supports AP, WDS Bridge, WDS Repeater, Client, and CPE + AP modes
-
Built-in 13 dBi directional sector antenna
-
1 x 10/100 Mbps (proprietary PoE) port
-
Comes with a proprietary PoE injector (non-802.3af compliant)
-
IP55 rated housing
-
Networks to another TEW-734APO or 5 GHz access point
-
Support for wireless encryption of up to WPA2
| |
|---|
|
Main Colour
|
White
|
| General |
|---|
|
Warranty
|
Three years.
|
|
Barcode
|
710931160697
|
|
Product Type
|
Access Point
|
|
Product Family
|
N300
|
| Compliance |
|---|
|
Certification(s)
|
CE, FCC
|
|
Standards
|
IEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1X IEEE 802.11a IEEE 802.11f IEEE 802.11n
|
| Network |
|---|
|
Network Speeds Supported
|
10/100Mbps
|
| Wireless LAN |
|---|
|
Frequency Band
|
5GHz
|
|
Speed Options
|
Up to 300Mbps
|
|
Transmit Power
|
28dBm
|
|
Encryption
|
WPA and WPA2
|
|
Receive Sensitivity
|
802.11a: FCC/ETSI: FCC: 14 dBm (max.), ETSI: 15 dBm (max.)/ -70 dBm (typical) @ 54 Mbps • 802.11n: FCC/ETSI: FCC: 17 dBm (max.), ETSI: 15 dBm (max.)/ -62 dBm (typical) @ 300 Mbps
|
|
Antenna Type
|
13 dBi internal directional antenna
|
|
RF Network Standard
|
IEEE 802.11a/n
|
| Interfaces/Ports |
|---|
|
LAN Ports
|
1 x RJ-45
|
| System |
|---|
|
Security
|
Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS • Firewall (CPE Mode): NAT, Port Forwarding, DMZ Host • Access Controls: MAC, IP Filter, Port Filter, Per-SSID client limiting • 802.1Q VLAN
|
|
Management
|
Local/remote web based management (HTTP, HTTPS) Local/remote CLI based management (Telnet, SSH) SNMP v2/v3 CPE Management Upgrade firmware Backup/restore configuration Event logging Syslog Reboot Restore to factory defaults Ping test Ping Watchdog Trace Route STP STP forward delay Traffic Shaping MAC based access control
|
| Electrical |
|---|
|
Power Adaptor Output Voltage
|
24V DC
|
|
Voltage/Power/Frequency
|
100 to 240V AC / 50 to 60Hz
|
|
Power Consumption
|
12W
|
|
Power Adaptor Type
|
External
|
| Environmental |
|---|
|
Environmental
|
Operating Temperature -20 to 70°C - Humidity 0 to 95%
|
| Physical |
|---|
|
Form Factor
|
Wireless Adaptor
|
|
In The Box
|
TEW-734APO, CD-ROM (User's Guide), Quick Installation Guide, Poll mounting hardware, Proprietary PoE injector (24 V, 1 A), Power cord, Grounding wire
|
|
Dimensions
|
20.5cm (W) x 6.4cm (D) x 6.1cm (H) - Weight 0.8kg
|
|
Case Colour
|
White
|
|
LED Status Indicators
|
Status LEDs
|
There are currently no reviews for this item
To leave a review please sign-in.
|